Product ID:BEACH SAND NON-FLAM COLOR
MSDS Date:12/02/1988
FSC:8010
NIIN:00-577-4929
MSDS Number: BJQTF

STEVEN INDUSTRIES

39 AVENUE C
BAYONNE, NJ 07002
US

Emergency Phone: 201-437-6500

Info Phone: 201-437-6500

Cage: 33150

STEVEN INDUSTRIES

8 BAYONNE, NJ 07002-3417 US

Telephone: 201-437-6501

Cage: 33150

RESIN

Fraction By Weight: 20%

LEAD CHROMATE (AS DUST) (14% AS PB, 3% AS CR3)

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 24%

OSHA PEL 0.5 MG/M3 (AS PB)

MAGNESIUM SILICATE (AS DUST)

CAS: 14807-96-6

RTECS: VV7720000

Fraction By Weight: 15%

OSHA PEL 2 MG/M3

IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 3%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MINERAL SPIRITS (VAPOR PRESSURE 2 MM HG)

CAS: 64748-88-7

Fraction By Weight: 34%

OSHA PEL 120 PPM

COMPLEX ORGANIC PIGMENT (AS DUST)

CAS: 2425-85-6

RTECS: QK4247000

Fraction By Weight: 1%

OSHA PEL 5 MG/M3

ADDITIVES

Fraction By Weight: 3 - 5%

LD50 LC50 Mixture:5G/KG (ORAL)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:IRRITATING TO SKIN AND EYES. FREQUENT
AND PROLONGED EXPOSURE TO LEAD CHROMATE DUST CAN CAUSE LIVER AND/OR
KIDNEY DAMAGE.
Explanation of Carcinogenicity:LEAD CHROMATE IS LISTED AS A CARCINOGEN.
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA AND POSSIBLE
UNCONSCIOUSNESS.

First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NEEDED. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
CONSULT PHYSICIAN.

Flash Point:105F,41C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM.

Spill Release Procedures:ENSURE ADEQUATE VENTILATION. REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.

Handling and Storage Precautions:AVOID EXCESSIVE HEAT OR OPEN IGNITION
SOURCES.
Other Precautions:SANDING, GRINDING, BLASTING OR WELDING OPERATIONS
SHOULD BE PERFORMED ONLY IF ADEQAUTE PRECAUTIONS ARE TAKEN.

Respiratory Protection:FUME AND DUST MASK OR AIR-SUPPLIED HOOD.
Ventilation:ADEQUATE TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health

Boiling Pt:B.P. Text:323 TO 390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE AND/OR CARBON DIOXIDE
ON COMBUSTION.

Waste Disposal Methods:DISPOSE OF AS PER LOCAL, FEDERAL, AND STATE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.